google-site-verification: googledf6627a46f810b1b.html


NTC Thermistors Temperature Sensors
Home  > INFO CENTER  > NTC Temperature Sensor/ Probe Technical Support  >  NTC Thermistors Temperature Sensors

NTC Thermistors Temperature Sensors


NTC Thermistor can be assembled in housing in a variety of configurations for temperature sensing, measurement, detection, indicator, monitoring and control. Thermistor temperature sensor probe assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature.The choice of assembly is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant.

Applications for temperature sensing include air temperature sensors, surface temperature sensors and immersion temperature sensors in home appliances or other electric equipments. They are widely used in air conditoners, regrigerators, freezers, air warmers; water heaters, potable water heaters, washers, disinfection cases; washing machines, driers, thermotanks; etc. Housings for air temperature sensors are often simple, inexpensive devices such as molded plastic shells, deep-drawn brass or aluminum cylinders, or even stainless steel tubes. Surface temperature sensors are designed to match the contour of the surface to be sensed, whether it's flat, curved, or round. Mounting holes or clips are often used to simplify installation of the sensor. Immersion temperature sensors are designed so that the sensing element will be surrounded by the medium to be sensed, often times a liquid. The sensing portion will normally protrude through a hole or orifice while a portion of the assembly will remain outside the medium to allow for the signal to be read. Immersion housings are usually threaded to allow them to be screwed into a hole or opening. Immersion part requests to be liquid and humidity prevention.

The material used for the housing will be dependent upon the temperature range needed, response time, cost, and special considerations such as UL, FDA or NSF requirements in food and/or medical applications. Some of the materials available include stainless steel, copper, plastic, teflon, brass, aluminum, epoxy and heat shrinkable tubing.

We list some of our products for your reference (customized specifications are available):