google-site-verification: googledf6627a46f810b1b.html


Home  > INFO CENTER  > NTC Temperature Sensor/ Probe Technical Support  >  Gas Water Heater by Using Temperature Sensor
Gas Water Heater by Using Temperature Sensor

In our daily life, the water heater is one of the most frequent appliances we use every day, at least every family every day use not less than 3 times. Before the water heater used are controlling the volume of water, heat no matter is a electric water heater is a gas. Now the city life tends to be convenient, time-saving, a state environmental protection ,so that we have a great improvement in the use of home appliances.

Before we need adjust the temperature by ourselves, for adults may not be very troublesome, but for children is not good.Now the gas water heater will not have this situation. There is a temperature sensorto control the water heating temperature.
The water is will not too cold or too hot. It is constant temperature water. There is a unique device, this device is unique in the circulating pump and the temperature sensor. The temperature sensor can monitor the temperature, once the water temperature does not reach the standard of bathing, the circulation pump is started, the water will be "sucked" to return pipe, and again to rise to realize heating temperature, thereby one hundred percent guarantee constant temperature.

It is very useful to use the gas water heater with the temperature sensor, So the stability of the temperature sensor must be selected high stability.